Zotac ZBOX nano VD01 PLUS User Manual

9 ZOTAC ZBOX nano4. Press <Enter> and select Disabled.5. Press F10 to save the conguration and exit. The PC will reboot.How to enable D

10 ZOTAC ZBOX nanoHow to disable USB2.0 charge (for S3/S4 status)1. In Advanced menu, select USB Conguration. 2. Press <Enter> and select

11 ZOTAC ZBOX nano2. Press <Enter> to display the USB Conguraion and navigate to Charger mode. 3. Press <Enter> and select Disab

12 ZOTAC ZBOX nanoHow to enable CIR controller (for internal IR receiver)1. Use the arrow keys to navigate to the Advanced menu and select Super I

13 ZOTAC ZBOX nano3. Enter CIR Controller and select Enabled. Enabled: enable the internal IR receiverDisabled: disable the internal IR receiver

14 ZOTAC ZBOX nanoCustomizing the ZOTAC ZBOX nano Please follow the instructions below to remove the cover of the ZOTAC ZBOX nano before customizin

15 ZOTAC ZBOX nanoInstalling a memory module1. Locate the SO-DIMM memory slot and insert a SO-DIMM memory module into the slot at a 45 degr

16 ZOTAC ZBOX nano2. Install the hard disk bracket to a 2.5-inch SATA hard disk with 2 screws.3. Insert the hard disk into the socket and gently sl

17 ZOTAC ZBOX nanoNote: Due to the 9.5mm-height limit of the hard disk, 12.5mm height drives are not supported by the ZOTAC ZBOX nano.4. Reinsta

18 ZOTAC ZBOX nanoSetting up the ZOTAC ZBOX nanoPlease connect the peripherals before using the ZOTAC ZBOX nano.1. Connecting a DisplayPort display

1 ZOTAC ZBOX nanoZOTAC ZBOX nano User’s ManualNo part of this manual, including the products and software described in it, may be reproduced, t

19 ZOTAC ZBOX nano6. Turning on the systemConnect the supplied AC adapter to the DC IN jack on the system rear panel and then press the power sw

20 ZOTAC ZBOX nanoPositioning the ZOTAC ZBOX nano• Do not cover or block the ventilation holes on ZOTAC ZBOX nano. To ensure proper o

21 ZOTAC ZBOX nano3. Connect the ZOTAC ZBOX nano to your LCD monitor with an HDMI/DP cable.IR receiverExternal USB IR receiver 2. External US

22 ZOTAC ZBOX nanoRemote control (optional)ZOTAC ZBOX nano is shipped with a remote control. Follow the instructions below to use the remote contr

23 ZOTAC ZBOX nanoLithium cell installation1. Locate the arrow on the rear cover of the remote control, and push the cover as the arrow

24 ZOTAC ZBOX nanoInstalling drivers and softwareInstalling an operating systemThe ZOTAC ZBOX nano does not ship with an operating system preinstal

25 ZOTAC ZBOX nanoUsing your ZOTAC ZBOX nanoConguring wireless connectionPlease follow the instructions below to connect to a wireless network:

26 ZOTAC ZBOX nanoUsing a dynamic IP (PPPoE connection)1. Repeat Step 1-3 in the previous section.2. Select “Obtain an IP address automatically”

27 ZOTAC ZBOX nano

28 ZOTAC ZBOX nano291-MA179-00

2 ZOTAC ZBOX nanoTable of ContentsProduct specications -------------------------------------------------------------------------- 3Safety informat

3 ZOTAC ZBOX nanoProduct specicationsChipset• VIA VX900H Product Dimensions • 127mm x 127mm x 45mmOnboard CPU • VIA Nano X2 U4025 (1.2 G/1066

4 ZOTAC ZBOX nanoSafety informationYour ZOTAC ZBOX is designed and tested to meet the latest standards of safety for infor-mation technology equipm

5 ZOTAC ZBOX nanoWelcomeCongratulations on your purchase of the ZOTAC ZBOX nano mini-PC. The following illustration displays the package content

6 ZOTAC ZBOX nanoGetting to know your ZOTAC ZBOX nanoFront viewRefer to the diagram below to identify the components on this side of the system1. P

7 ZOTAC ZBOX nanoRear view12345678910Refer to the diagram below to identify the components on this side of the system.1. Power input (DC19V)The

8 ZOTAC ZBOX nanoHow to disable the ring LED indicator1. Turn on the ZBOX nano mini-PC, then press <Delete> to enter the BIOS SETUP UTILITY.