Zotac G41ITX-B-E Specifications download pdf (Page 11)

Intel G4X-ITX series Motherboard

Preparing the Motherboard

The motherboard shipped in the box does not contain a CPU or memory. You need to purchase

these to complete this installation.

Installing the CPU

Be very careful when handling the CPU. Make sure not to bend or break any pins on the back.

Hold the processor only by the edges and do not touch the bottom of the processor.

The following illustration shows CPU installtaion components

1. Unhook the socket lever by pushing down and

away from the socket.

2. Lift the load plate. There is a protective socket

cover on the load plate to protect the socket

when there is no CPU installed.

3. Remove the protective socket cover from the

load plate.

4. Remove the processor from its protective cover,

making sure you hold it only by the edges.

It is a good idea to save the cover so that

whenever you remove the CPU, you have a

safe place to store it.

5. Align the notches in the processor with the

notches on the socket.

6. Lower the processor straight down into the

socket without tilting or sliding it into the socket.

Note:MakesuretheCPUisfullyseatedand

levelinthesocket.

7. Close the load plate over the CPU and press

down while you close and engage the socket

lever.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 45 46

No comments

Zotac G41ITX-B-E Specifications Page 11